The AVANTONE “Cabernet (C-series)”
mics from AVANT ELECTRONICS are
designed to offer true professional
performance. They will meet or surpass the
performance and specifications of much
higher priced mics.
The AVANTONE
CK-1 is truly a gorgeous looking and
sounding microphone. The design, character
and performance can be compared directly to
fine studio-standard FET mics…but
at a fraction of their cost!
The rugged CK-1 microphone body and capsule
assembly are precision machined of BRASS.
Aesthetically the compact body features an
elegant Metallic Cabernet Wine-Red finish,
accented with polished nickel trim and
capsule assembly.
The high quality FET circuitry will yield
pleasing professional results comparable to
much more expensive designs.
Any studio can proudly offer the CK-1 for
instrumental and percussion miking…It exudes
class visually as well as sonically.
The CK-1 is equally at home on the stage for
drum overheads, acoustic instruments and
piano.
The CK-1 INCLUDES (3) 19mm (3/4") interchangeable
capsules to provide unlimited miking
possibilities!
Manufactured
using the finest materials yielding a very
solid feel, superb structural integrity and
rugged reliability.
The rugged
CK-1 mic is able to produce professional
results with a clean sonic character.
The 3
capsules (cardioid, omni, and
Hyper-cardioid) offer versatility for
accommodating virtually any miking task.
The included
SSM
Shockmount is superb in
allowing a precise positioning of the mic
while inhibiting the transfer of unwanted
vibrations up into the mic. This isolation
allows for superior professional results.
Separate -10 dB pad & 80 Hz
LF roll off switches
Uses
include:
Cymbals, Hi-Hats, acoustic guitar, drum
overheads, piano, percussion etc…
The -10dB attenuation switch can be
engaged when miking very high SPL
sources to keep from overloading the
electronics.
The 80Hz HIGH-PASS filter switch can be
engaged to reduce rumble and to keep
unwanted low frequencies from “muddying
up” the track.
Standard
Items Supplied:
AVANTONE
CK-1 FET Microphone
AVANTONE
SSM Shockmount
Elegant padded genuine wooden Mic box
19mm Cardioid, Omni, and Hyper-Cardioid
capsules
Owners Manual
--------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------
|
Type: |
True Condenser |
|
Polar Pattern/s: |
Cardioid , Hyper-Cardioid & Omni Capsules
included |
|
Frequency Response: |
25-20,000 Hz +/- 3dB |
|
Sensitivity: |
15mv/pa |
|
Output Impedance: |
<=200 Ohms |
|
Maximum SPL : |
138dB (0.5% THD @1000Hz) |
|
S/N Ratio re 1Pa :
|
78dB |
|
Noise Floor |
< 17
dBA |
|
Output Connector: |
Male XLR 3 pin |
|
High-Pass Switch |
80 Hz 6dB/octave |
|
Attenuation Switch |
-10 dB |
|
Included Accessories: |
3 Capsules,
Padded Wooden Box & SSM Shockmount |
|
Power Requirement: |
Standard 48 Volt Phantom /
5mA |
|
Dimensions: |
(23mm) x (153mm) |
|
Weight: |
5 oz. |
|
Finish: |
Polished Nickel trim /
Metallic Cabernet Red Body |
5-Year Warranty
